=レーザー光源=                            

*532〜NIRモジュール型  *各種半導体レーザー  *シングルブルー等

*レーザー光線は肉眼や皮膚などの組織体に悪影響を及ぼします。いかなる出力・波長のレーザーでも直接或いは間接的にでも肉眼や皮膚等に入・放射する事は、一過性的又は非可逆的で深刻な影響・ダメージを受ける場合があり得ます。特に肉眼では見えない(見えにくい)DUVやIR光線(400nm以下、800nm以上の波長)は眩しく感じないので、知らぬうちに重大な結果を招く事が多々有る事を忘れないで下さい。
従って、その取り扱いには充分な注意と確認が常に要求されます。ご注意下さい。
(学生さんやレーザーの取り扱いに不慣れな方々は、特に注意し、熟知した方の指示を仰いでください)


Home 会社案内 レーザー光源類 光学部品セル等 測定装置 WDM通信用機器 教育用光学実験キット

解析用ソフトウエア ホログラム用感材 軟X線観測用感材 お問い合わせ (C)2002/1 AlphaBug Inc

*405nm 〜 1064nm励起用半導体レーザー
製品一覧

*Single Emitter lasers

405nm 450nm 520nm 635nm 6XX nm 808nm 830nm 9XX nm 976nm wavelength stabilized 1064nm
160mW 800mW 2mW 2mW 2mW 2W 1W 3W 3W 10W
  5W 5mW 5mW 5mW 4W   10W 9W  
      20mW 20mW 8W        
      400mW 60mW          
        600mW          
        800mW          

*Mult-Single Emitter lasers

635nm 793nm 808nm 915nm 940nm 976nm 976nm wavelength stabilized
1.6W 6W 15W 20W 20W 20W 18W
5W 15W 30W 25W 25W 25W 25W
  30W 40W 30W 30W 30W 27W
    50W 50W 50W 50W 50W
    60W 65W 65W 65W 60W
      80W 80W 100W 85W
      100W 100W 200W 180W
      110W 110W    
      120W 120W    
      140W 140W    
      150W 150W    
      200W 200W    

=以下にいくつかの製品仕様のみご案内致しますので、これら以外の製品に関してはメールでお問い合わせ下さい。


                     405nm 160mW Coaxial Packaged MM Diode Laser
  *K405E03FN-160mW  
・405nm @160mW Output power #Bio-medical instrument
・60μm Fiber core diameter #DNA sequence
・0.22 NA #Printing
  #Scientific research
   
   
K405 K405 pack

             Specification (25℃)   Unit            K405E03FN-160mW
      Optical data  CW output power  mW  160
 Center wavelength  nm  405
 Tolerance of λ  nm  ±5
 Spectral width (FWHM)  nm  <3
 Temperature drift of λ  nm/℃  〜0.2
      Fiber data   Fiber core diameter  μm  60
 Numerical aperture (NA)  ー  0.22
 Fiber connector  ー  SMA-905
      Electrical data  Operating current  mA  125
 Threshold current  mA  26
 Slope efficiency  mW/mA  1.6
 Operating voltage  V  5±0.5
 Reverse voltage  V  5
       
            Others
 Operating temperature  ℃  10〜30
 Storage temperature  ℃  −20〜+70
 Expected lifetime  h  >10,000
 Dimensions  mm  8.5 x 7.5 x 10.7

 (fiber&connector not included)

   
 Lead soldering temperature  ℃  260(10 sec)
 Package  ー  3 pin
     


 

                     445nm 5W Fiber Coupled Diode Laser
  *K445FA7FN-5W  
・445nm @5W Output power #Biochemical analysis
・105μm Fiber core diameter #Medical use
・0.22 NA #Display
  #Scientific research
   
   
             Specification (25℃)   Unit    K445FA7FN-5W          
      Optical data  CW output power  mW  5(Typ)
 Center wavelength  nm  440〜455               
 Spectral width (FWHM)  nm  <3               
 Temperature drift of λ  nm/℃  〜0.2
     
      Fiber data   Fiber core diameter  μm  105              
 Numerical aperture (NA)  ー  0.22
 Fiber connector  ー  FC, ST, SMA-905
      Electrical data  Operation current  mA  1000〜1200(Max)               
 Threshold current  mA  150(Min)〜300(Max)               
 Operating voltage  V  28(Min)〜48(Max)
 Reverse voltage  V  35
     
     
     Thermistor data  Thermistor (KΩ)/β(25℃)  10±5%/3477
     
       Others  
 Operation temperature  ℃  10〜30
 Storage temperature  ℃  −20〜+70
 Expected lifetime  h  >10,000
 Dimensions  mm 112 x 62 x 23
 (fiber&connector not included)    
 Lead soldering temperature  ℃  260(10 sec)
 Package  ー  2 pin

 

                     520nm Coaxial Packaged SM Diode Laser
  *K520F03SN-5mW.  
・520nm @2&5mW Output power #Aiming beam
・4μm Fiber core diameter  
・0.13 NA  
   
   
   
K520

             Specification (25℃)   Unit            K520F03SN-5mW.
      Optical data  CW output power  mW  5
 Center wavelength  nm  520
 Tolerance of λ  nm  ±10
 Spectral width (FWHM)  nm  <3
 Temperature drift of λ  nm/℃  〜0.2
      Fiber data   Fiber core diameter  μm  4
 Numerical aperture (NA)  ー  0.13
 Fiber connector  ー  SMA-905
      Electrical data  Operating current  mA  <80
 Threshold current  mA  50
 Slope efficiency  mW/mA  0.25
 Operating voltage  V  7
 Reverse voltage  V  2
       
            Others
 Operating temperature  ℃  10〜40
 Storage temperature  ℃  −20〜+70
 Expected lifetime  h  >10,000
 Dimensions  mm  φ7.4x34

 (fiber&connector not included)

   
 Lead soldering temperature  ℃  260(10 sec)
 Package  ー  3 pin
     

 

                     635〜650nm Butterfly Package Fiber Coupled Diode Laser
   *K635E14FN-0.4W (each 650nm available)  
・400mW Output power #Medical use
・105μm or 200μm Fiber core diameter #Biological analysis
・0.22 NA  
・635nm, 650nm Wavelength  
 
 
             Specification (15℃)   Unit     K635E14FN-0.4W
      Optical data  CW output power  mW  400
 Center wavelength  nm  635
 Tolerance of λ  nm  ±5
 Spectral width (FWHM)  nm  <3
 Temperature drift of λ  nm/℃  〜0.2
      Fiber data   Fiber core diameter  μm  105/200
 Numerical aperture (NA)  ー  0.22
 Fiber connector  ー  SMA-905
      Electrical data  Operation current  A  1.3
 Threshold current  A  0.8
 Slope efficiency  W/A  0.8
 Operation voltage  V  2.2
 Reverse voltage  V  2
      PD data   Current  μA  200〜400
      Thermistor data  Thermistor  (KΩ)/β(25℃)  10±5%/3477
      TEC data  Max Current  A  4
 Max Voltage  V  9.8
      Others  Storage temperature  ℃  −20〜+80
 Expected lifetime  h  >10,000
 Dimensions  mm  φ7.4 x 38.0
 (fiber&connector not included)    
 Lead soldering temperature  ℃  260(10 sec)
 Package  ー  7 pin
     


 

                     660〜690nm HHL Package Fiber Coupled Diode Laser
  *K6XXF09FN-0.8W (each Mult-Single Emitter available)  
・800mW Output power #Medical use
・105μm or 200μm Fiber core diameter #Biological analysis
・0.22 NA  
・660nm, 665nm,680nm,690nm Wavelength  
 
 
K6XX

             Specification (20℃)   Unit     K6XXF09FN-0.8W
      Optical data  CW output power  mW  800
 Center wavelength  nm  660, 665,680,690
 Tolerance of λ  nm  ±10
 Spectral width (FWHM)  nm  <3
 Temperature drift of λ  nm/℃  〜0.2
      Fiber data   Fiber core diameter  μm  105/200
 Numerical aperture (NA)  ー  0.22
 Fiber connector  ー  SMA-905
      Electrical data  Operation current  A  1.5
 Threshold current  A  0.6
 Slope efficiency  W/A  0.9
 Operation voltage  V  2.1
 Reverse voltage  V  2
      PD data   Current  μA  200〜2000
      Thermistor data  Thermistor  (KΩ)/β(25℃)  10±5%/3477
      TEC data  Max Current  A  4
 Max Voltage  V  9.8
      Others  Storage temperature  ℃  −20〜+70
 Operating temperature  ℃  10〜30
 Expected lifetime  h  >5,000
 Dimensions  mm  〜44.5 x 31.8 x 18.0
 (fiber&connector not included)    
 Lead soldering temperature  ℃  260(10 sec)
 Package  ー  8 pin


 

                     808nm Multiple Functions Dual wavelength Diode Laser
  *K808F15FA -8W.  
・8W Output power #Medical use
・200μm, 400μm Fiber core diameter #Material processing
・0.22 NA  
・808nm Wavelength  
・+650nm aiming beam output  
・Optional Functions・・TEC/PD/Thermistor  
K808 K808_pack

             Specification (25℃)   Unit         K808F15FA -8W.  
    Optical data  CW output power  W  8
 Center wavelength  nm  808
 Tolerance of λ  nm  ±3 ±10
 Spectral width (FWHM)  nm  <3
 Temperature drift of λ  nm/℃  〜0.3
    Fiber data   Fiber core diameter  μm  200 400
 Numerical aperture (NA)  ー  0.22
 Fiber connector  ー   SMA-905
    Electrical data  Operation current  A  10         
 Threshold current  A  1.5    
 Conversion efficiency  %  35〜45
 Slope efficiency  W/A  0.8〜1.0
 Operation voltage  V  2.18
 Reverse voltage  V  2
    TEC data  Max current  A  6 
 Max voltage  V  9.8
    PD data  Current  mA

 0,2〜2,0

    Thermistor data  Thermistor (KΩ)/β(25℃)  10±5%/3477
    Others  Operation temperature  ℃  10〜30
 Storage temperature  ℃  −20〜+70
 Expected lifetime  h  >10,000
 Dimensions  mm  44.5 x 31.8 x 18
 (fiber&connector not included)    
 Lead soldering temperature  ℃  260(10 sec)
 Package  ー  15 pin

   Aiming beam data  Output power  mW  <2
 Wavelength  nm  650±10
 Voltage  V  2.2
 Current  mA  <30


 

                     976nm 180W Wavelength Stabilized Diode Laser
  *K976AA9RN -180W.  
・180W Output power #Laser pumping
・200μm Fiber core diameter  
・0.22 NA  
・976nm Wavelength  
・Narrow Bandwidth  
・1030-1200nm feedback protection  
K976 K976pack
             Specification (18℃)   Unit         *K976AA9RN -180W.  
    Optical data  CW output power  W  180
 Center wavelength  nm  976
 Tolerance of λ  nm  ±0.5
 Spectral width (FWHM)  nm  <1
 Spectral Shift over Temperature  nm/℃  〜0.02
 Spectral Shift over Power  nm/A  〜0.05
    Fiber data   Fiber core diameter  μm  200
 Numerical aperture (NA)  ー  0.22
 Fiber connector  ー   ー
    Electrical data  Operation current  A  13        
 Threshold current  A  0.8    
 Slope efficiency  W/A  14.7
 Operation voltage   V  34
    FeedBack  Wavelength Range  nm  6
    Isolation  Isolation  dB  30
    Others  Operation temperature  ℃  18〜25
 Storage temperature  ℃  −20〜+70
 Dimensions  mm  130 x 76 x 22.5
 (fiber&connector not included)    
 Lead soldering temperature  ℃  260(10 sec)
  Package  ー  2 pin
  
K976data

 

                     1064nm 10W High Power Diode Laser
  *KA64FATCD -10W.  
・10W Output power #Medical use
・400μm Fiber bundle diameter  
・0.22 NA  
・1064nm Wavelength  
・Optional・・PD/Thermistor/650nm aiming beam  
   
KA1064 KA1064pack

             Specification (25℃)   Unit         KA64FATCD -10W.  
    Optical data  CW output power  W  10
 Center wavelength  nm  1064
 Tolerance of λ  nm  ±10
     
 Temperature drift of λ  nm/℃  〜0.3
    Fiber data   Fiber core diameter  μm  400
 Numerical aperture (NA)  ー  0.22
 Fiber connector  ー   SMA-905
    Electrical data  Operation current  A  6.6         
 Threshold current  A  0.7    
 Conversion efficiency  %  50
 Slope efficiency  W/A  1.7
 Operation voltage  V  3
     
           
     
    PD data  Current  mA

 0,2〜2,0

    Thermistor data  Thermistor (KΩ)/β(25℃)  10±3%/3477
    Others  Operation temperature  ℃  10〜30
 Storage temperature  ℃  −20〜+70
 Expected lifetime  h  >10,000
 Dimensions  mm  44.5 x 31.8 x 18
     
     
 Package  ー  16 pin

 

                           Turn-Key Diode Laser System
                            *DS3-11312-XXX-LD.
・Up to 300W Output power 電源DS3
・Air Cooling
・Fiber Delivery
・Optional RED aiming beam
・Temperature Control
・Compact Design
        *各LD組み込み後の外観*

  Specification                     DS3-11312-XXX-LD.
 Optical data  CW output power  2mW〜300W Customizable
 Center wavelength  450nm〜1550nm
 Tolerance of λ  ±10nm
 Spectral width (FWHM)  <3
 Power Stability  ±5%
 Fiber data  Fiber core diameter  105, 200, 400μm
 Numerical aperture (NA)  0.22
 Fiber connector  SMA-905
 LD Controller Data  Control Temp. range  15〜30℃
 Accuracy  ±1℃
 Alam Setting  15〜30℃
 Operation Mode  CW / QCW
 Operation Current  <15A
 Operation Requirements  Operation Temperature   0〜40℃
 Cooling Requirements  Internal fan, at least 10cm clearance both sides.
 Operation Humidity  5〜80%
 Storage temperature  −20〜+55℃

 Power Supply
     Requirements


 Input Power  220V AC, 50〜60 Hz or 90〜260V AC, 50〜60 Hz
 Power Loss  <500W
 Others  Dimensions  L305 x W295 x H135mm
   Weight  <18Kg
     



                              このページのTopに戻る